Vintage Copper Tag
Recently I have been noticing the paper crafting boards I follow on Pinterest are pinning new types of tag art. From fun and funky to just beautiful, I am loving the variety of art being shown on these little “mini” canvases. I felt inspired to start working on more tags to build up a collection for gifts, paper embellishments and jewelry.
This tutorial is for a simple but lovely Vintage Copper Tag.Supplies:
G&P Butterfly Charm Set
G&P Vintage Dress Forms Accents
G&P Glastique Gloss Finishing Glaze
G&P Copper Kettle Embossing Powder
G&P Piccolo Embossing Powder Adhesive
G&P Yellow Ochre 3D Enamel Gel
G&P Oval Bezel with 1-Loop
Piccolo Easy Grip Tweezers
Brown ink stamp pad
Mini Adhesive Foam squares
Crystal stickers
Heat gun
Vine and sentiment stamps
Small piece of cardstock
Ribbon
Smear G&P Yellow Ochre 3D Enamel Gel both on the front and back of the bezel. Let dry.
Take the brown dye ink pad, rub it on the edges and sides of the bezel.
Ink the vine stamp with the brown ink and stamp around the edges of the tag.
Carefully remove the two small butterflies from the G&P Butterfly Charm Set. Remove the loops on both butterflies with a craft knife.
Carefully remove the swirl dress form G&P Vintage Dress Forms Accents set. Using a craft knife remove the stand from the dress form. Save the stand piece and all of the other kit pieces for A time for Nature tutorial; check out the Globecraft & Piccolo blog for instructions. 🙂
Apply Piccolo Enamel Adhesive to the dress form and butterflies. Apply G&P Copper Kettle to the butterflies and dress form. Heat to set.
Use Glastique Gloss Finishing Glaze to attach the butterflies and dress from to the tag. Let dry.
Stamp a sentiment on the small piece of card and cut to fit the tag. Rub the brown ink on the edges of the card stock to give it an aged look.
Use Glastique Gloss Finishing Glaze to glue on the sticker gems to the tag as shown. Let dry.
Thread the ribbon through the loop on the top of the tag and tie.
Now you have an embellishment to add to a gift or paper craft.
Hop on over to the Globecraft and Piccolo Blog for my A Time for Nature tutorial!
Until next time, safe travels!
DIY Leprechaun Wee Folk Door
I have always loved the idea of the wee Folk or faery, be the good bad or just odd folk that roamed about. One of my favorite faery movies from my childhood was Darby O’Gill and the Little People. The costumes, sets and the illusion of the miniature world of the leprechauns had me entranced Leaving out small gifts or useable objects for them in hopes of getting the favor of the faery was always a magical idea to me. So I got to thinking, why not make a Leprechaun door to add a bit of magic to a home for Spring!Supplies:
G&P Classic Victorian Oval Bookboard Frame
G&P Burnt Umber 3D Enamel Gel
G&P Glastique Matte Finishing Glaze
G&P Medium Flourishes Piccolos
G&P Shamrock Dreams Enamel Powder
G&P Vintage Gold Enamel Powder
G&P Mossy Glen Enamel Powder
G&P Piccolo Embossing Powder Adhesive
Piccolo Easy Grip Tweezers
Green crystal sticker gems
Sizzix Tim Holtz Alterations embossing folder Woodgrain
Dye ink pads in Black and Deep Brown
Small foam squares
Sharp scissors or craft knife
Carefully remove the frame from the package, put aside the globe and easel. Save those pieces for future projects.
Using a ruler, mark a straight line about 2 inches from the bottom on the frame pieces. Using a sharp scissors or a craft knife, cut the bottom portion off.
Run the back plate and bottom frame sections through an embossing machine using the woodgrain embossing folder. Taking the brown and black dye ink pads, rub them on the embossed sections of the frame.
Apply G&P Burnt Umber 3D Enamel Gel to the embossed and now inked sections. Smear the enamel gel in the wood grain pattern with your finger or a cosmetic sponge in a up and down pattern.
Apply Embossing Powder Adhesive to the top and middle pieces of the frame, the Piccolos and a thin line on the bottom frame. Apply Mossy Glen Enamel Powder to the middle frame, Shamrock Dreams powder to the top frame and thin line on the inner frame, Vintage Gold powder to the Piccolos. Heat to set.
Adhere all three sections of the frame together with Glastique Matte Finishing Glaze, using office clips to keep the frame pieces in place while it dries. Apply Glastique Matte to the back of the Piccolos, place them on the frame and let dry.
Adhere the back plate to the top frame portion with foam squares. Apply the large swirl Piccolo to the back plate with foam squares to give the illusion of a door handle. Apply the green sticker gems to the faux door with Glastique Matte Finishing Glaze and let dry.
Apply removable poster adhesive to the back of the now completed faux door. Place at the bottom of a wall on the molding, a shelf or anywhere you think a leprechaun might like a magical door! May you have many lucky days ahead!Until next time, safe travels!
Let it snow…..
Even though it is not Winter yet, it sure feels like it. We have a cold weather front moving in and there is some talk of snow! It is the perfect weather to stay inside, decorate for the holidays and make gifts. Today I am going to show you how to make a snowflake jewelry set that can be put in a card set using Globecraft &Piccolo products.Supplies for earrings and necklace:
2 packages of Globecraft & Piccolo Snowflake Accents
Globecraft & Piccolo Pure Sparkle Silver Glitter
Globecraft & Piccolo Glastique Gloss Finishing Glaze
Globecraft & Piccolo Titanium White 3D Enamel Gel
Piccolo Easy Grip Tweezers
Pale Blue Sticker gems
Silver jumprings
Silver chain
2 Earring wires
Jewelry clasp
Flat nose pliers
Wire cutter
Carefully remove all of the snowflake Piccolos from the chipboard frame. Coat one side of all of the snowflake Piccolos with Titanium White 3D Enamel Gel. Let dry. Now coat the other side of only 1 large snowflake, 2 mediums, 2 smalls and 2 minis. The pieces with both sides coated will be for the jewelry and the snowflakes with only one side with enamel will be used for the card (or other projects if you like).
Carefully apply Glastique Gloss Finishing Glaze to all of the snowflakes and sprinkle Pure Sparkle Silver Glitter on top. Let dry.
Now apply two more coats of Glastique Gloss Glaze to the snowflakes. Let dry. The layers of glaze will give the snowflakes a glass like finish and help the glitter “pop”.
Now apply Glastique Gloss Glaze to two of the small snowflakes. Carefully position the mini snowflakes in a manner to create a enclosed space to put a silver jump ring through. Let dry. Go back and seal the areas where the snowflakes touch with Glastique. Let dry.
Use Glastique Gloss Finishing Glaze to glue on the pale blue sticker gems to the large, medium and small snowflakes. Let dry.
Open up oval jump rings and put through the small triangles in 2 of the medium, the space in small and mini glued pieces and 1 large snowflakes; close jump rings.
Cut 2 separate lengths (two inches long) of silver chain and attach each length to a medium snowflake with a small jump ring. Add another jump ring on top and attach the earring wire.
Cut two lengths of silver chain (1/2 inch long) and attach to the small and mini snowflakes glued together with a small jump ring. Add another jump ring on top and attach to the earring wire with the medium snowflake. Cut 16 inches of silver chain and string the large snowflake on it. Attach jewelry clasp to chain with small jump rings.
You can give the jewelry set as is or you can make a matching card to place the jewelry in. Use the left over snowflakes for embellishments on the card. 🙂Supplies for card:
White card stock
Pale Blue card stock
Globecraft &Piccolo Blue Pearl 3D Enamel Gel
Globecraft &Piccolo Glastique Gloss Finishing GlazeUntil Next Time, Safe Travels!
Ancient and Contemporary Inspired Artistry