• #TBT A Quick Vampire Bite of Halloween

    Hello! Continuing my Throwback Thursday posts, this time going with my love of hosting Halloween parties and the little ghoulish delights that need to be decorated. While it would have been okay to just put plastic vampire fangs on each cupcake, I wanted to make the fangs an edible candy treat!

    Supplies: 
    Amazing Mold Putty
    Plastic Children’s size Vampire Fangs
    Wilton Candy Melts 
    Wilton Blood Red Sparkle Gel Icing
    Red Velvet Cake Mix
    Black Cupcake tin liners
    White icing tinted blue-grey
    Toothpicks 
    Sandwich baggies
    Butter knife

    I cleaned two child sized vampire fangs, with soap and water to prepare them for molding. I placed them on a black dinner plate so I had a smooth and contrasting surface to work on.

    I mixed up some Amazing Mold Putty and molded it around the front portions of the vampire fangs. I was careful to press the Mold Putty up against the fangs to make sure I got a good molding of the fangs.

    Once the Mold Putty was cured I removed the plastic fangs. To close up the grove created by the gum portion of the vampire fangs I mixed up and pressed tiny little wads of Mold Putty into the open portion of the mold as seen in the above photo. By doing this I would be able to place melted candy into the molds with no worry of the candy leaking out the back of the fang mold.

    To keep the molds upright I placed a small teacup plate inside the large dinner plate and placed the molds snug inside the dinner plate and against the teacup plate. This will keep the molds in place while the candy is piped into the molds.

    Following the manufacturer instructions I carefully melted the Wilton Candy Melts in a sandwich bag in the microwave. Once the candy was melted I snipped the end off a corner of the sandwich baggie and pipped the candy into the molds. 

    *Make sure the candy is completely cooled before removing from the mold to make sure you don’t break off a fang. A quick trip in the refrigerator is a sure way to help your candy along!

    I made up a batch of Red Velvet cupcakes, applied blue-grey tinted icing, dribbled some Wilton Blood Red Glitter Gel Icing and carefully placed a set of candy fangs on each cupcake.

    I had so much fun making the candy fangs I made more than I needed for the cupcakes, so the extra fangs made fun addition to cranberry cocktails! 
    Until next time, safe travels!

    *This is an affiliate post, which means I received an assortment of products as a compensation for the creation of art. To read my full disclosure, click here

  • #TBT The Upcycled Mummy’s Curse! A spoOky DIY

    Continuing my Throwback Thursday posts, this time highlighting my love of Halloween, Ancient Egypt and upcycled crafts! Posted in 2015 on the Amazing Casting Products blog,  I had some rather odd inspiration for this project and it all started with me finding some fun plastic Halloween skulls at a Thrift store. With two of them, I made Ghoulish Glam Skulls and the rest I saved for Halloween decor around the house.

    While I was outside in the garden one of our dogs, Luna, decided to play in the house, the skulls were close to her toys and she cracked one of them. I of course couldn’t be angry with her playing though her rather adorable “I totally did NOT do that” face also helped. When I was about to throw out the skull, an idea came to me: why not use the cracked skull as a base for a Halloween mummy head prop? 

    Supplies: 
    Amazing Casting Resin
    Alumilite Dyes
    Liquitex Gloss and Matte Varnish
    Acrylic Paint
    Aluminium Foil and Paper Bags
    Stir Sticks
    Plastic Halloween Skull
    Cotton Muslin Fabric
    Black leaf tea bags
    Beacon’s Gem-Tac
    Paint Brush
    Paper Tape Roll
    Hot Glue Gun and glue sticks

    With the crack being along the side of the eye socket and most of the left side of the skull I needed to stabilize the now-fragile skull. I thought of using Casting Resin but I needed to seal the hole before filling the skull with resin. I taped up the crack with clear packing tape, creating a temporary seal for the resin.

    Knowing that if I were to fill up the whole skull with Casting Resin it would not only require a lot of resin but make the skull on the heavy side I needed to put some sort of filler inside the skull. Using used clean paper bags and crumpled aluminum foil I slipped them inside the skull through a hole in the bottom.

    Next I made small batches of Amazing Casting Resin and poured it through the hole in the bottom of the skull. By pouring small batches and then tilting the skull I was able to make sure all of the inside of the skull was equally covered with resin, stabilizing the plastic skull. This process went very quickly because Amazing Casting Resin sets up in 10-15 minutes. I ended up using 3/4 of a resin kit to fill the inside of the skull.

    Once I had filled up the inside of the skull I hot glued a tape roll to the bottom of the skull to create a neck for the mummy head. Any gaps between the tape roll and the skull I filled in with aluminum foil and hot glue.

    I then mixed up some Casting Resin and poured it into the newly formed neck of the mummy head. I put some extra foil into the neck cavity and filled it up with more Casting Resin, using up all of the kit.

    Once the resin was cured, I removed the tape from the now resin-filled crack and removed any excess resin spills off the skull.

    Since not much of the plastic would be visible under the wrappings but I didn’t want it looking like a skull. I painted the skull with a mixture of yellow, brown and black acrylic paint. I glued on used tea bags to create eyelids and created a nose out of paper bags and tin foil. I glued on some loose tea grounds to give the look of sand/dirt and sealed it with Liquitex Matte Varnish.

    To create wrappings: I dyed cotton muslin fabric in a bath of hot black leaf tea and bags. I let it soak for a few hours to stain and then let the fabric dry. Once dry I tore the fabric into 2 inch strips to make wrappings. I started applied the wrappings to the skull with a bit of Beacon’s Gem-Tac and started to wind it around the skull. I didn’t use any set pattern or style; I just had fun and made sure to cover up any of the more skull-like features of the head.

    Once I was finished wrapping the skull I liked the overall look, but felt it needed something more to create the look of age.

    Since real mummies still have old oils and resin still visible on the surface of their wrappings, I created some out of Liquitex Gloss Varnish mixed with some Brown Alumilite Dye. I used the varnish instead of resin because I wanted to control how it dripped and needed it to dry quickly. The Alumilite Dye allowed me to tint the varnish without losing the transparent nature of the varnish.

    Once dry, this spooky décor is a perfect addition to my creepy curiosity cabinet on display for Halloween!

    Until next time, safe travels!

    This is an affiliate post, which means I received an assortment of products as a compensation for the creation of art. To read my full disclosure, click here

  • #TBT Sit for a Spell! DIY Eye of Newt Apothecary Jar

    Kicking off my Throwback Thursday posts with one of my favorite upcycling Halloween crafts. Posted in 2015 on the Amazing Casting Products blog, this quick and easy project is perfect with Halloween coming up fast.

    Taking inspiration from one of William Shakespeare’s most famous plays, Macbeth:

    “Eye of newt, and toe of frog,
    Wool of bat, and tongue of dog,
    Adder’s fork, and blind-worm’s sting,
    Lizard’s leg, and howlet’s wing,–
    For a charm of powerful trouble,
    Like a hell-broth boil and bubble.”

    That part of the play has a wonderful spooky quality, often inspiring all types of ghoulish displays and decor for Halloween. The interesting part is that most of those names of ingredients were not intended to be taken literal, but were herbalist or folk terms for common herbs and plants. In the case of “Eye of newt” it was referring to a type of mustard seed. However thanks to pop culture more often than not most people think of real newt eyes in a jar. So knowing some seeds in a jar isn’t that ghoulish of a Halloween decoration I decided to go with the pop culture version of making a jar with faux newt eyes. 

    Supplies:
    A Glass Jar previously used for a candle
    Resin
    Moss
    Eye Beads
    Glitter (optional)
    Chalk Sticker
    Chalk Pen
    Wood Bead
    Black Chalk Paint
    Sandpaper

    I cleaned up a old jar that previously had a three wick candle with a metal lid, making it perfect for an apothecary jar. I picked this type of glass because it is tempered and can handle the heat often created by thick pours of curing resin.

    I put some dried moss at the bottom of the jar to add some visual contrast. It would also help with adding some textured base to prop the fake eyes on so they wouldn’t all sink to the bottom.

    I mixed up 3 fluid ounces of Amazing Clear Cast Resin and slowly poured it on top of the moss to cover it.

    The moss became a bit dark after the resin started to soak into it, so before the resin layer started to cure I sprinkled a bit of micro crystal glitter* to give just a slight shimmer to the moss layer.

    *The glitter is an optional step

    For newt eyes I used transparent acrylic Eye of Warding beads carefully placed in the still wet resin. Recent popularity of the beads has had a lot of bead manufacturers making all kinds of the Eye of Warding beads out of glass, acrylic, clay and even recycled plastic. 

    *Take a trip to your favorite craft store to check out what types of beads they might have for you to use!

    Once I let the first layer of resin cure for about an hour I added some more eye beads and little snippets of moss. I didn’t want to add too much. I wanted it to look like someone used the “newt eyes” a lot in their spells.

    While the final layer of resin cured I worked on the lid to the jar. To bring down some of the bright silver tone of the lid I used some sandpaper and little bit of chalk paint to give it an aged look. A painted wooded bead, glued on top of the lid, gave it a pull knob.

    With a chalk board sticker for a label the jar was finished and not a single newt harmed! 🙂

    Until next time, safe travels!

    *This is an affiliate post, which means I received an assortment of products as a compensation for the creation of art. To read my full disclosure, click here

  • Enchanting Halloween Jewelry Charms

    My favorite time of year, Fall is finally here! Cooler weather, plant-life changing colors and the promise of my favorite holiday of the year, Halloween just right around the corner. Now that I have a little more free time I am trying to find ways to use up a lot of my older art supplies mixed with new and interesting items.  Scouring stores for Halloween decos, supplies, fabrics and ideas is favorite and seemingly a family tradition in our household.

    I found at JoAnn Fabric Stores a wonderful line of Halloween charms by hildie & jo. The charms are sturdy, have a great finish and there is a great variety of carded charms. My only problem was most JoAnn Fabric Stores were selling out of the charms quickly and these were the only sets I could find. Each set had different themes and assortment of styles. I didn’t use all the charms yet but several I immediately knew what I wanted to create using up some of my older jewelry supplies.

    The large two skull pendant set while advertised as Halloween charms I felt fit a Día de los Muertos (Day of the Dead) theme better. Noticing the skulls had a warm golden honey color rhinestone set in them along with a black enamel antiquing, I picked black and honey tone crystals from Fiona Accessories, silver flower and leaf beads to accompany the skull.

    The rather adorable silver fang charm was just perfect as is, and I felt if I added any of the other charms to it, the piece would get lost. I matched the red enamel on the fangs to small red Swarovski crystal beads and silver-lined translucent red Miyuki magatama (oval) beads. By spacing the beads on the chain in irregular intervals, it created the look of crystallized blood flowing down the chain and past the fangs.

    The tiny witch craft charms were so sweet and well crafted I felt adding them to silver earring hoops with purple Swarovski crystals was the best way to create a delicate but magical cascade.

    The more tongue-in-cheek witch charms I turned into a bracelet, using black, green and pink Czech fire polished beads. The playful movement of the charms and drops added to the fun everyday style.

    After having such a fun time creating these pieces I can’t help but want to haunt the stores for more!

    What might inspire you to make some fashionably ghoulish accessories this season?

    Until Next Time, Safe Travels!

  • Fall Miniature Art Supply Finds

    With the first day of Fall fast approaching I swear I can almost smell the cool air, soon to be falling leaves, pumpkin pie and Halloween candy to come! It also has me haunting stores in search of new art supplies, in particular items perfect for Halloween and my eternal addiction, miniatures.  Sit down for a spell, pour yourself a cup of tea and let me speak of some of the crafting bounty.

    artresurrected-miniature-finds-tracy-alden-10

    These 1/12th Scale Miniature Cocktail Glasses I found on Amazon. They are clear plastic and rather lightweight so gluing them down or filling them with resin, such as I did to create a miniature Happy Hour with the help of Amazing Clear Cast, is highly suggested. My tutorial on how to fill these darling cups can be found HERE. No two cups are alike in the set so if you would like to have doubles or to create a table setting you will need to buy several sets.

    artresurrected-miniature-finds-tracy-alden-3

    Even though Thrift Shop Ephemera Pack by Tim Holtz Idea-ology® paper embellishments has been out for several years, and easily found at most craft shops, I had thought it wouldn’t be of much use to me. Once I finally got a good look at the pack I broke down and bought one. I saw some of the mini photos and insect prints, once opened I found some really wonderful miniature advertisements and bottle labels perfect for Playscale (1/6th)and 1/12th scale miniatures. I would say only about 1/4th of the pack is good for miniature scenes but since I do a lot of mixed media work I thought it was a great buy.

    artresurrected-miniature-finds-tracy-alden-4

    The previous pack encouraged me to go ahead and buy the Curiosities Ephemera Pack by Tim Holtz Idea-ology® in the Halloween crafting section of Michaels. It is mostly Halloween with a tiny bit of Fall themed paper embellishments. I would say almost the entire pack is perfect for Playscale (1/6th)and 1/12th scale miniatures along with mixed media art. Just full of reproduction prints, in miniature, of postcards, decorations, bottle labels, advertisements and science lab posters, this is a must have for any fan of Halloween and vintage prints.

    artresurrected-miniature-finds-tracy-alden-5

    Another product that has been out for awhile but normally shoved into the scrapbooking sections of most stores is the Tim Holtz Idea-ology® Decorative Domes. I would honestly call these domes mixed media and jewelry findings with a nice overlap into scale miniature. The glass domes are rather thick glass with a sturdy brass loop on top (which with the addition of a jumpring would make a cute pendant). I found most 1/12th scale skulls, or in this case beads, fit inside the domes. Glued down with a little moss, they look perfect as specimens in a science lab!

    artresurrected-miniature-finds-tracy-alden-6

    Another scrapbook section sequestered collection is the Tim Holtz Idea-ology® Corked Domes. Taller, and thinner glass than the Decorative Domes, without a brass ring on top, these are more mixed media and miniature use. With the cord base it is very easy to push metal wire, pins and bases in and put the dome on top to create still life and museum miniature replicas.

    artresurrected-miniature-finds-tracy-alden-7

    I found at my local JoAnn store Maker’s Halloween™ Littles and Art-C™ Mini Black Metal Keys. The little resin skull and bat was in the floral department as decor for miniature fairy gardens. There is quite a few resin pieces to pick from but the skull stuck out as a prefect miniature desk decoration. The keys can normally be found in the scrapbook embellishment section or jewelry charm section. I added the keys to a large black enameled jumpring to create keyring. JoAnn doesn’t seem to carry these items online, so check your local store to see what they have in stock!

    artresurrected-miniature-finds-tracy-alden-8

    These new Pemberley Tray Charms and Multicolored Tea Set Charms By Bead Landing™ I found at a local Michaels but you can also find them at their Online Store. They have quite a few charm sets but my favorite is the matching Tray and Tea Sets. While intended as jewelry charms, and the plates have tiny holes in them, they are around 1/12th in scale. If you place a cup just right or add a tiny biscuit, to hide the holes in the plates, they are a lovely addition to miniature scene.

    artresurrected-miniature-finds-tracy-alden-9

    After I unpacked all my miniature finds I quickly found I had a perfect scientists’ Halloween soirée!

    What lovely miniature treasures will you find in your travels?

    Until Next Time, Safe Travels!