• Vintage Copper Tag

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-11

    Recently I have been noticing the paper crafting boards I follow on Pinterest are pinning new types of tag art. From fun and funky to just beautiful, I am loving the variety of art being shown on these little “mini” canvases. I felt inspired to start working on more tags to build up a collection for gifts, paper embellishments and jewelry.
    This tutorial is for a simple but lovely Vintage Copper Tag.

    Supplies:
    G&P Butterfly Charm Set
    G&P Vintage Dress Forms Accents
    G&P Glastique Gloss Finishing Glaze
    G&P Copper Kettle Embossing Powder
    G&P Piccolo Embossing Powder Adhesive
    G&P Yellow Ochre 3D Enamel Gel
    G&P Oval Bezel with 1-Loop
    Piccolo Easy Grip Tweezers
    Brown ink stamp pad
    Mini Adhesive Foam squares
    Crystal stickers
    Heat gun
    Vine and sentiment stamps
    Small piece of cardstock
    Ribbon

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-2

    Smear G&P Yellow Ochre 3D Enamel Gel both on the front and back of the bezel. Let dry.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-3
    Take the brown dye ink pad, rub it on the edges and sides of the bezel.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-4
    Ink the vine stamp with the brown ink and stamp around the edges of the tag.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-5
    Carefully remove the two small butterflies from the G&P Butterfly Charm Set. Remove the loops on both butterflies with a craft knife.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-12

    Carefully remove the swirl dress form G&P Vintage Dress Forms Accents set. Using a craft knife remove the stand from the dress form. Save the stand piece and all of the other kit pieces for A time for Nature tutorial; check out the Globecraft & Piccolo blog for instructions. 🙂

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-6
    Apply Piccolo Enamel Adhesive to the dress form and butterflies. Apply G&P Copper Kettle to the butterflies and dress form. Heat to set.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-7
    Use Glastique Gloss Finishing Glaze to attach the butterflies and dress from to the tag. Let dry.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-8

    Stamp a sentiment on the small piece of card and cut to fit the tag. Rub the brown ink on the edges of the card stock to give it an aged look.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-9

    Use Glastique Gloss Finishing Glaze to glue on the sticker gems to the tag as shown. Let dry.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-10

    Thread the ribbon through the loop on the top of the tag and tie.

    ArtResurrected-copper-tag-tutorial-Tracy-Alden-1

    Now you have an embellishment to add to a gift or paper craft.

    Hop on over to the Globecraft and Piccolo Blog for my A Time for Nature tutorial!

    Globecraft-Steampunk-clock-tutorial-Tracy-Alden

    Until next time, safe travels!

  • Inspire Art lapel pins

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_1

    Positive affirmations, inspirational art and things that make one smile can really help with the creative process. Why not make and wear a little bit of inspiration? Today I want to show how to make your own Inspire Art lapel pins, such as the blue above with the copper butterfly.

    Supplies:
    G&P Assorted Bookboard Charm Bezel Shapes
    G&P Bookboard Birds & Butterflies Accents
    G&P Glastique Gloss Finishing Glaze
    G&P Burnt Umber 3D Enamel Gel
    G&P Yellow Ochre 3D Enamel Gel
    G&P Metallic Copper 3D Enamel Gel
    G&P Turquoise Lagoon Enamel Powder
    G&P Copper Kettle Enamel Powder
    G&P Siam Silver Enamel Powder
    G&P Piccolo Embossing Powder Adhesive
    Piccolo Easy Grip Tweezers
    Heat Gun
    2 Connie Crystal 10mm Crystal beads
    2 Silver jumprings
    1 Charm Brooch Pin
    Crystal sticker gems
    Small foam squares
    2 Flat nose pliers
    1 round nose plier
    1 headpin
    1 eyepin
    Sentiment stamps or sticker

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_2

    For this project we are using the large round flower bezel from the Charm Bezel Shapes set. Carefully remove one butterfly and swirl from the bookboard Accents set.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_3Apply Piccolo Enamel Adhesive to all of the bookboard pieces. Apply G&P Copper Kettle to the butterfly, G&P Siam Silver to the swirl and G&P Turquoise Lagoon Enamel Powder to the flower bezel. Heat set.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_4Stamp a sentiment on a 1inch by 2inch piece of paper. Apply G&P Burnt Umber. G&P Yellow Ochre, and G&P Metallic Copper 3D Enamel Gel with a cotton swap to the paper front and back to give an aged look.
    *Ignore this step if you rather use a sentiment sticker.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_5Using the tweezers grip the edge of the stamped paper and very carefully scorch the edges with a small candle flame.
    *Ignore this step if you rather use a sentiment sticker.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_6

    Use Glastique Gloss Finishing Glaze coat the flower bezel with a thin layer. Let dry. Adhere foam squares to the back of the butterfly and the sentiment, press onto the bezel. Attach the swirl Piccolo with Glastique Gloss and coat the assembled pieces with a thin coat of Glastique Gloss.

    Art Resurrected_DIY_Inspire_Art_lapel_pinTracy_Alden_tutorial_Photo_7  Use Glastique Gloss Finishing Glaze to glue on the sticker gems to the bezel as shown. Let dry.
    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_8Thread one crystal bead onto the jewelry eyepin and one on the headpin. Using the round nose pliers curl over the remaining wire to form a loop on both jewelry pins.
    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_9

    Open up jump rings with the flat nose pliers and put one jumpring through the loop on the headpin and eyepin, close jumpring. Use the other open jumpring to connect the crystals to the bezel as shown, close jump ring.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_10Glue charm brooch pin to the back of the bezel with jewelry glue. Let dry.

    Art Resurrected_DIY_Inspire_Art_lapel_pin_Tracy_Alden_tutorial_Photo_11

    The inspire art pin is now ready to wear or give as a gift!

    Until next time, safe travels!

     

  • DIY Leprechaun Wee Folk Door

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo1
    I have always loved the idea of the wee Folk or faery, be the good bad or just odd folk that roamed about. One of my favorite faery movies from my childhood was Darby O’Gill and the Little People. The costumes, sets and the illusion of the miniature world of the leprechauns had me entranced  Leaving out small gifts or useable objects for them in hopes of getting the favor of the faery was always a magical idea to me. So I got to thinking, why not make a Leprechaun door to add a bit of magic to a home for Spring!

    Supplies:
    G&P Classic Victorian Oval Bookboard Frame
    G&P Burnt Umber 3D Enamel Gel
    G&P Glastique Matte Finishing Glaze
    G&P Medium Flourishes Piccolos
    G&P Shamrock Dreams Enamel Powder
    G&P Vintage Gold Enamel Powder
    G&P Mossy Glen Enamel Powder
    G&P Piccolo Embossing Powder Adhesive
    Piccolo Easy Grip Tweezers
    Green crystal sticker gems
    Sizzix Tim Holtz Alterations embossing folder Woodgrain
    Dye ink pads in Black and Deep Brown
    Small foam squares
    Sharp scissors or craft knife

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo2
    Carefully remove the frame from the package, put aside the globe and easel. Save those pieces for future projects.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo3
    Using a ruler, mark a straight line about 2 inches from the bottom on the frame pieces. Using a sharp scissors or a craft knife, cut the bottom portion off.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo4
    Run the back plate and bottom frame sections through an embossing machine using the woodgrain embossing folder. Taking the brown and black dye ink pads, rub them on the embossed sections of the frame.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo5
    Apply G&P Burnt Umber 3D Enamel Gel to the embossed and now inked sections. Smear the enamel gel in the wood grain pattern with your finger or a cosmetic sponge in a up and down pattern.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo6
    Apply Embossing Powder Adhesive to the top and middle pieces of the frame, the Piccolos and a thin line on the bottom frame. Apply Mossy Glen Enamel Powder to the middle frame, Shamrock Dreams powder to the top frame and thin line on the inner frame, Vintage Gold powder to the Piccolos. Heat to set.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo7
    Adhere all three sections of the frame together with Glastique Matte Finishing Glaze, using office clips to keep the frame pieces in place while it dries. Apply Glastique Matte to the back of the Piccolos, place them on the frame and let dry.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo8
    Adhere the back plate to the top frame portion with foam squares. Apply the large swirl Piccolo to the back plate with foam squares to give the illusion of a door handle. Apply the green sticker gems to the faux door with Glastique Matte Finishing Glaze and let dry.

    Globecraft_DIY_leprechaun_Door_Tracy_Alden_tutorial_Photo9
    Apply removable poster adhesive to the back of the now completed faux door. Place at the bottom of a wall on the molding, a shelf or anywhere you think a leprechaun might like a magical door! May you have many lucky days ahead!

    Until next time, safe travels!

     

  • A Steampunk Valentine

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_1
    I seriously can’t get enough of Steampunk art these days. The diversity, detail and amazing styles that are being created are a wonder to behold. Continuing with this theme, I wanted to create a different form of the traditional Valentines. My feeling was, why not let a Steampunk fan know they are loved with a card? 🙂

    Supplies:
    G&P Key to My Heart Charm Set H006
    G&P Keys to My Heart Accents H009
    Vintage Gears Embellishment Set ST002
    G&P Glastique Gloss Finishing Glaze
    G&P Glastique Matte Finishing Glaze
    G&P Ruby Red Slippers Embossing Powder
    G&P 24K Gold Embossing Powder
    G&P Copper Kettle Enamel Powder
    G&P Vintage Black Enamel Powder
    G&P Piccolo Embossing Powder Adhesive
    Globecraft & Piccolo Pure Sparkle Gold Glitter
    Piccolo Easy Grip Tweezers
    Red crystal sticker gems
    Blank card
    Red card stock
    Gear and key Stamps
    Stamp ink

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_2
    Carefully remove all of the Piccolos from the chipboard frames. Separate the frame, gears, small keys, two lock hearts without loops and the swirl. Place the remaining pieces to the side for a wearable Valentine’s Day Bling project; check out the Globecraft & Piccolo blog for that tutorial. 🙂

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_3
    Apply Piccolo Enamel Adhesive to all of the remaining pieces. The two heart locks I coated with G&P Ruby Red Slippers Embossing Powder. The two keys, windup key and swirl with G&P 24K Gold Embossing Powder. The four tiny gears with G&P Copper Kettle Enamel Powder. The frame and remaining gears I coated with G&P Vintage Black Enamel Powder. Heat set.

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_4
    Stamp the card stock with the gears and key stamps. Adhere to the front of the blank card. Carefully glue the embossed Piccolos to the front of the card using the G&P Glastique Matte Finishing Glaze.

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_5
    Coat all of the Piccolos with G&P Glastique Gloss Finishing Glaze and add the red sticker gems to a few of the gears. Put a few drops of Glastique Gloss on the card, smear the drops  with your finger and sprinkle Globecraft & Piccolo Pure Sparkle Gold Glitter on top.

    Art Resurrected_DIY_Valentine's Day Card_Tracy_Alden_tutorial_Photo_6
    Stamp or write your favorite Valentine’s sentiment inside. 🙂

    Until next time, safe travels!



  • CHA Winter Show 2013

    Another Craft and Hobby Association Winter show has come and gone. While there were less vendors this year, I honestly feel this was one of the best I attended. This show was amazing! The classes, networking and show floor events were wonderful. I was able to make new accounts with several vendors and got to meet up with some seriously talented artists.

    The wonderful Globecraft & Piccolo had a booth again at CHA. I am proud to be part of their Design Team and a part of product design & development! Members of the G&P design team, Jami Bostjancic (of Accent Allusions) and I were honored to be asked to do demos at the booth for three of the four days of CHA.

    Here is some of the cool G&P products we got to demo at the show:

    NEW Globecraft & Piccolo UV Resin: It cures in 3 minutes in UV light, scratch resistant, self leveling and not affected by humidity (in fact it can set up underwater). It works wonderful on top of  chipboard, acrylic, paper, polymer clay, fabric, vellum and so much more!

    NEW Globecraft & Piccolo Acrylic Bezels and Tags: Clear acrylic bezels and tags come in so many shapes and sizes. Perfect for making jewelry, mixed media and card decor! Looks lovely stamped and with paper backings.

    NEW additions to the Globecraft & Piccolo Embossing powder line: These powders are specially designed to look awesome on large and small projects. G&P Embossing Powders are made of varying-sized particles that create a unique depth and dimension not available with traditional embossing powders. These wonderful colors can mimic stone, metal, natural elements and aged surfaces. The new colors are Real Rust, Ruby Red Slippers, Shamrock Dreams, Turquoise Lagoon, and Platinum!

    New Piccolo Chipboard Elements: Now in many different sizes, great for home decor, card making, mixed media, jewelry and more! From holiday, seasonal, steampunk, animals, swirls, and elaborate corner and edge elements.


    The Globecraft & Piccolo booth at CHA.

    G&P display showcasing all of their embossing powders and chipboard charm sets. All of the charm sets on the velvet boards are my work. 🙂


    G&P acrylic and chipboard bezels samples by the talented design team, the Secrist family (G&P) and I.


    Just beautiful card decor work with Piccolos by the design team!


    G&P Ornament sets. The lovely mixed media piece on the left is made by the talented Linda Neff (part of the G&P design team) from ornaments and a lampshade.


    An overview of the booth.


    Some samples of the demo work showing the new UV Resin and acrylic bezels! Pieces by Pat Secrist (Of G&P), Jami Bostjancic and I.

    The following photos are close up of booth display samples to show you how many new styles and techniques you can use with the new G&P products.


    G&P acrylic bezel, G&P UV Resin, mica powder, permanent ink, paper and sticker gems.


    Mini oval acrylic bezels with Pure Sparkle Glitter in Gold, mica powder, 3D Enamel Gel and sticker gems. Faux glass technique.


    Top left and bottom bezels are acrylic and top right bezel is bookboard. 3D Enamel Gels, Pure Sparkle Glitter in Gold and Silver, mica powder and sticker gems. Glastique Gloss is used to seal each layer. Topped with the new UV resin. Nebula/night sky technique.


    G&P acrylic bezel, G&P UV Resin, G&P Piccolo Gears, mica powder, permanent ink, paper and sticker gems. Piccolo layer technique.


    G&P acrylic bezel, G&P UV Resin, mica powder, 3D Enamel Gels, Origami foil paper and sticker gems. Faux glass technique.

    Until next time safe travels!