• Metallic Resin Charm Necklaces

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-1
    Sometimes inspiration for my craft projects is right in front of me, and surely this was one of those cases. I collect all kinds of little stones, trinkets and pieces of glass and often put them on display around the house in eclectic little assortments. I noticed the larger decorative glass pebbles I have, that can be found at most craft stores, have wonderful little round shapes that make me think of shapes of charms and pendants. I knew Amazing Remelt would make not only quick but glass-smooth molds and Amazing Clear Cast would be perfect to pour into the molds to create the charms, so off I went looking for my supplies!

    Supplies:

    Amazing Remelt
    Amazing Clear Cast
    Alumidust
    Alumilite Metallic Powder
    StazOn Ink
    Stir Sticks
    Mini Stamps
    Decorative Glass Pieces
    Small Hand Drill
    Ribbons, Cording and Metal Wire

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-2

    I started off with removing several blocks of Amazing Remelt from their containers. They are easy to remove by running a stir stick around the edges and gently lifting the Amazing Remelt from the container.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-3

    The Amazing Remelt containers acted as my mold boxes and I placed the glass pieces in the containers, making sure to leave some space between each piece so the mold will have separate spaces for each piece. You do not need to use an mold release on these pieces as they are smooth and non-porous.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-4

    I heated one half of a Amazing Remelt brick in the microwave until liquid, in one of the containers it came in. I poured the heated Remelt in the two containers holding the glass pieces, but only a thin enough layer to cover the bottom and a bit of the sides of the glass. This layer acts as an anchor for the pieces without having to glue the glass in place, I let this layer cool completely.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-5

    The second pour of Amazing Remelt I covered the glass pieces completely and let them cool to finish the molds.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-6

    Once the molds were cool and no longer tacky I carefully removed them from the containers and flexed the molds until the glass pieces popped out.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-7

    I mixed up a small batch of Amazing Clear Cast and filled each round in the mold halfway and let it cure to a hard yet somewhat tacky state.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-8

    I then carefully inked and stamped little stamps with StazOn Ink into the tacky resin. The tacky state of the resin prevents the stamp from sliding and “grabs” onto the stamp, making sure I got a good stamped image.
    *Pick your favorite stamps! As long as the stamp can fit the mold opening you can use any number of stamp images.

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-9

    I rubbed Alumidust, in several different colors on the first layer of resin that was now stamped. Just like with the stamps there is no rhyme or reason to the color choices, just have fun with all the Alumidust colors!

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-10

    I mixed up two batches of Amazing Clear Cast mixed with Alumilite Metallic Powder, one silver and one bronze, and poured it in the molds as a second layer. I let it cure overnight.
    * If you live in an high humidity area you might notice the when you pop out the resin pieces the next day they will be hard but slightly tacky. Just remove them from the molds and place them on parchment paper and wait for the resin to completely harden outside of the molds. 

    ArtResurrected-Resin-Remelt-Pendants-Tracy-Alden-11

    Once all of the pieces were fully cured, I carefully sanded any uneven edges and drilled holes with a hand drill. I scrubbed them clean and threaded jewelry wire and jump rings through the drilled holes. Now they are ready for ribbons, thread or chain!

    Want to see more of Amazing Casting Products tutorials and inspiration? Hop on over to their Blog to see all kinds of Amazing Artists’ Designs!
    Until Next Time, Safe Travels!
  • Day of the Dead Papier-mâché #Cre8time Inspiration

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-1

    I am a huge fan of Day of the Dead festivals and artwork, even if it is a wee bit ahead of the calendar date! I was inspired to create these pieces after going to Linpeng International Inc./Fiona Accessories to visit with Fiona and Jimmy Lin. They are truly wonderful and talented people with a dedication to creating beautiful hand painted beads, jewelry and beading supplies, and I am grateful for meeting Fiona at the Craft and Hobby Association Trade Show in 2014. At this visit, as usual, we discussed beads and jewelry, went over new ideas and displays, but Jimmy showed me something a bit different this time: little packages of Acrylic flat back gems, normally used for scrapbooking, in a wide variety of colors. He asked me if I could think of any other applications and the first thing that came to mind was covering papier-mâché skulls with the gems for Day of the Dead decor.

    Supplies:

    Fiona Accessories Acrylic flat back gems Flower and Diamond shaped in sizes 14mm, 19mm, 22 mm and 20x30mm
    Mini acrylic flat backed gems (normally for scrapbooking, nail or shoes)
    Liquitex Gloss Varnish
    Acrylic Paint
    Paint Brushes
    Papier-mâché mask and skull by Darice and often sold at Michaels late Summer into Fall
    Beacon Gem-Tac (Great stuff, non-toxic and flexible)
    Sakura Pigma Micron Pen Set (I just love using their pen sets for any illustrations I do)

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-2

    First I gathered all of my supplies, picking colors of paint, acrylic gems, brushes and which papier-mâché pieces I felt would look the best for what I had in mind.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-3

    I started by applying white acrylic paint to the entire surface of the papier-mâché  skulls. I let each layer of the paint dry completely before adding the next layer to prevent the papier-mâché from getting too wet and losing shape. I noticed that 2-3 coats of paint are normally required to get complete coverage.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-4

    I started to loosely place where I would like the Fiona Accessories Acrylic flat back gems to sit on the papier-mâché and traced outlines in pencil, but I did not glue them on at this point. This would give me outlines to follow and color in with the pens and paint before applying the gems.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-5

    There is no set pattern or design to Day of the Dead masks, as it is a wonderfully free form style of art, allowing the artist to put any variety of shapes, symbols and scroll-work on their pieces. I have a fondness for plant life and organic shapes so I painted flowers, vines and geometric patterns across the pieces in silver, black, red and blue. I outlined key elements with Sakura Pigma Micron pens to make them visually pop more.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-6

    Since I really liked how the silver paint looked I added some leaves and geometric shapes in green pearl paint, along with flowers in red pearl paint. The paint having a slight shimmer would play off the sparkle of the acrylic gems. Applying the paint and drawing with the pens can take some time but I find it rather relaxing and meditative.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-7

    Once the paint was fully dry I applied the Fiona Accessories Acrylic flat back gems to the papier-mâché  skulls with Beacon Gem-Tac. A small drop of the Beacon Gem-Tac will go a long way and dry perfectly clear; just holding the gem in place for a few seconds is all that is needed to get the gem to stick to the skulls.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-8

    Once all the large acrylic gems were applied to the papier-mâché  skulls I filled in the open areas with more paint and pen details, then adding mini acrylic gems with more Beacon Gem-Tac. I let the glue fully dry before going onto the next step.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-9

    To make sure all of the detail and gems were protected I applied three coats of Liquitex Gloss Varnish to the skulls, letting each layer dry completely before applying the next.

    ArtResurrected-Day-of-the-Dead-Paper-Mask-Tracy-Alden-10

    Once the varnish was dry I was able to add them to the rest of my Day of the Dead artwork collection!

    Want to share your projects with Fiona Accessories‘s products? Post any projects and ideas on their Facebook Page! 🙂

    Until Next Time, Safe Travels!

  • Faux Ancient Egyptian Pendants

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-1

    One of my favorite pastimes is to go visit museums and flip through books with ancient jewelry collections. The ingenuity, craftsmanship and raw talent in ancient work is a true inspiration.

    One of those ancient testaments to ingenuity is Ancient Egyptian Faience, known as the world’s oldest known form of glazed ceramic and a precursor to the earliest forms of glass making. While it shares the name faience with the tin-glazed pottery associated with Faenza in northern Italy, it is not true faience. Ancient Egyptian Faience is not made of clay at all but type of frit, a mixture of sand, quartz, silica, calcite lime and a mixture of alkalis. To the ancient Egyptians, it was known was known as “tjehnet” which means brilliant or dazzling. Often crafted into beads, pendants, figures, tiles and other small objects, using push molds or sculpted by hand, then heated to create lovely glazed pieces of art.  It was used as a imitation of semi precious stones, such as lapis lazuli and turquoise, though many colors could be achieved by changing some of the ingredients of the frit mixture.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-2

    I wondered, how I could make something that looked like Ancient Egyptian Faience but without the need of a kiln? Using real Egyptian Faience as my model, such as those in the above photo, gave me a good idea of what colors and textures I wanted to match. While it is very easy to create the shapes out of any number of air dry and oven bake clays, the glazed appearance of much of the Ancient Egyptian Faience was going to be tricky. I got to thinking how Amazing Casting Products’s Amazing Clear Cast Resin on top of polymer clay could appear like a glaze and more akin to the lovely ancient work.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-3

    I started with conditioned polymer clay, in the color tones of blues and greens, betting that a base color of those hues would give me the best results. I also conditioned a piece of white polymer clay as a color test. I then cut all pieces into sizes and shapes good for pendents.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-4

    I went through my collection of stamps and charms, picking ones that were Egyptian themed. I sprayed the object to be pressed in the clay with water to act as a stamp release from the clay and pressed firmly into the clay.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-5

    I trimmed the pieces of clay close to the stamped images, smoothing edges and defining details of the stamped images.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-6

    After curing the polymer clay by manufacturer’s instructions, and once the pieces were cool, I trimmed off any rough edges on the clay pieces with a craft knife.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-7

    I applied a thin layer of Liquitex Gloss Varnish to all of the pieces and before they dried rubbed on a light layer of Alumidust.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-8

    I mixed a very small amount of blue and green Alumilite Dyes with Amazing Clear Cast Resin, making sure to fully stir the dyes into the resin and let it sit for 10 minutes.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-9

    By letting the resin sit for 10 minutes, the resin will be thicker and stick more to the polymer clay pieces. I carefully applied the resin to the back and sides of the pendants with a toothpick first and let them cure completely, as per manufacture instructions, before moving onto the next step.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-10

    After the back of the polymer clay pieces were dry I applied resin to the front of the pieces with a toothpick, making sure to get all the groves and indents of the stamped images. I let this layer of resin cure completely.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-11

    Once all of the pieces were fully cured I carefully drilled holes to put beading wire and thread through each piece.

    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-12
    Here are the finished Faux pieces with the real Egyptian Faience, a pretty close match if I do say so!
    ArtResurrected-Resin-Egyptian-Pendants-Tracy-Alden-13
    The addition of wood, glass, semi precious stones and shell makes these pieces look straight out of ancient jeweler’s marketplace!

    Want to see more of Amazing Casting Products tutorials and inspiration? Hop on over to their Blog to see all kinds of Amazing Artists’ Designs!

    Until Next Time, Safe Travels!
  • Garden Color Inspiration

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-1

    Here in California the warm weather seems to be here to stay and more than a bit early. Even in drought conditions plants are starting to grow, sprout and flower, which of course has me doing a mad dash to clean up the garden, and get it ready for Summer. Some of my plants, like the ivy above with one of my ceramic masks peeking out, doesn’t need much care other than some trimming of dead growth. It can take some time but I find it calming and it lets my mind wander, often inspiring my artwork. However when I started cleaning the garden this time I got to thinking about how my art supplies were not really in any good order than could immediately inspire me.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-2

    Letting the colors of the garden be my guide I started to sort some of my jewelry supplies. A lot of my bead and jewelry supplies I often sort by type and shape, but, while practical, that doesn’t give me an idea of what color tones I have. I complied a majority of my green tone glass, crystal, pearl and acrylic beads, picking ones that reminded me of all the shades of greenery in my garden. By taking them off their stringing cords, putting them in a recycled plastic container, I was able to put more beads in one container, giving me a green hue inspiration selection at my fingertips.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-3

    With the ivy being such a great color inspiration I went back to the garden for more. Aquilegia or otherwise known as Columbinea hardy perennial, I have growing in my garden after I found out it does amazingly well in our arid climate, as long as I keep it in part shade. With the weather being so warm these little lovely flowers popped up quick, giving the local butterflies food and the garden little clusters of color.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-4

    I bought a pale purple rose bush some years back to add to my collection of roses; however it never did well in the ground so I transplanted it into a large pot where it grows marvelously, producing small, compact, citrus smelling, pastel purple roses that turn pale pink in the hotter temperatures.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-5

    Using the columbine and roses for my next color mix inspiration I gathered all of my pink and purple beads for my next container. I seriously had no idea how many pink crystals I had bought until put them all together!

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-6

    My next color pallets came from flowering Iris. While originally I didn’t know much about iris plants, I have grown to love theses easy going and stunning plants. My first iris plants came from my mother who decided to give me several from her mystery mix collection of iris she bought from a local iris society. They turned out to be a collection of large Bearded rhizomatous irises, in all kinds of wonderful colors. After seeing these lovely plants grow it is no surprise the word iris comes from the Greek word for rainbow.

    While currently there is no true red iris available, there are deep purples, pinks and brown iris hybrids that iris growers have carefully grown over the years. The lovely one above is a variety of Iris known as “Dynamite” from Schreiner Iris Gardens. It grows fast, has lovely large blooms and is prolific.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-7

    I let my iris continue to grow, just transplanting new plants into more pots each year. Like many hybrid plants the high heat and arid climates put non-native plants to the test. In this case iris love the sun and bloom in hot temperatures, such as these lovely deep maroon iris, most likely from the “Infrared” line of iris by Joe Ghio.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-8

    With those flowers as my guide Czech Fire Glass beads, Pressed Glass beads from India, Embossed Ceramic focals, and red acrylic flowers easily found homes in this rich color pallet.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-9

    This plant had not bloomed last year due to a insect infestation, but thankfully a swarm of ladybugs decided to congregate in the garden saving my iris and roses, allowing for this beautiful splash of color to finally bloom this year. While a bit smaller than other bearded iris, it more than makes up for it with warm honey and marigold colors.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-10

    Those wonderful earthy tones had me gathering up warm browns, yellows and unusual bright beads. African Trade Beads, Venetian Glass Beads, Swarovski Crystals, hand crafted ceramic beads and carved cattle bone beads fit perfect in this collection.

    ArtResurrected-Craft-Color-Inspiration-Tracy-Alden-11

    As of this posting, my collection of snow white iris have just started to bloom. Named “Skating Party”, a tall bearded iris, first registered by Larry Gaulter in 1983, is attractive to bees and butterflies. Off to start going through my whites, creams and satin tone beads….:)

    Until Next Time, Safe Travels!

  • Craft & Hobby Association Mega Show 2015 part 2

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-1

    Time for my Craft & Hobby Association Mega Show 2015 recap, part 2! My last Post about this year’s winter Craft and Hobby Association Mega Show was mostly about Amazing Casting Products/Alumilite Corp., my samples and demos at the CHA. This post will be about some of the new products, booth designs and awesome artists at CHA!

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-12

    I made sure to drop by the Linpeng International Inc./Fiona Accessories booth to visit with Fiona and Jimmy and to see their new beads for 2015. They had a wonderful selection of new tear drop crystal beads in all kinds of wonderful colors I had to order.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-13

    Along with the new mixed color strands of hand painted beads Fiona and Jimmy were happy to show some of their new Bohemian pendants and beading accessories. They buy beads from manufacturers from around the world so you can find a wide variety of beads from China, Japan, India, Czech, countries in Africa and more in their booth.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-14

    Linpeng beading supplies can be found at many craft and hobby stores, Fiona Accessories finished jewelry can be found at chain gift shops in the US and you can order their beads online.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-15

    Cousin Corporation of America had a stunning Fairy Tale themed booth display, which had a very Once Upon a Time feel to it. Cousin is starting new environmentally friendly improvements through recycling, conservation and sustainability. Their booth decor had elements acquired from thrift stores and upcycled art turned totally glamorous.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-16

    This lovely chain dress overlay had a wonderful temple dancer feel to it and I think with a soft cut black dress underneath it would be perfect for a Renaissance Fair!

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-17

    Cousin’s new mixed bead hanks next to another one of their lovely necklace and fabric displays.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-18

    This bib necklace on display had a wonderful Southwestern riverbed feel. I loved the use of warm color tones with the cool color of turquoise.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-30

    Spellbinders had a huge and rather multifaceted booth, with loads of displays and make n takes. The display that stopped me in my tracks was the opulent display in their booth by A Gilded Life.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-19

    Spellbinders and A Gilded Life now have a licensed line of dies, bezels, pendants, jewelry findings and trims sold online and at art and craft stores. Photos do not do their work justice!

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-20

    Midwest Design Imports, a whole distributor of boas, artificial birds & butterflies, craft items, and more, had a wonderful selection of fairy, woodland characters and glass minis in their booth. However what caught my eye was their very humorous and full of character line of artificial owls of all sizes. I think those adorable owls will be perfect for Autumn-themed craft classes and displays! A rather cool aspect about Midwest Design Imports is all the feathers they sell are byproducts of other industries, and would have otherwise been discarded.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-21

    I had to meet up with the talented Suzann Sladcik Wilson, book author and CEO of Beadphoria, Inc.. Cheerful and happy to talk about jewelry projects and ideas, Suzann was looking great in the The CHA Designers in Action Showcase event. Tiffany Windsor of Cool2Craft, on her way to the Showcase, decided to photobomb us, making it all the more fun!

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-22

    Suzann had a lovely display of her soldering book, jewelry and upcycled necklace folding cards.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-23

    On the other side of her jewelry display Suzann’s first book and other beautiful beaded creations.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-24

    A new booth this year that I found the last day of CHA was Bead Fairy TV, owned and operated by Jolene Star (AKA the Bead Fairy). Specializing in bead tutorials, online classes, beading kits and more.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-25

    I just had to walk into her booth; the colors, beads and just positive feeling was addicting. Do check out her beading 101 videos on YouTube; they are fun, funky and bound to get you beading. You might also know Jolene her from her store Bazaar Star Beadery in New Jersey.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-26

    Spinrite Yarns otherwise known as Yarnspirations made a huge booth display showcasing yarn and amazing artistic talent. “Yarnia” as they called it was inspired by the theatrical versions of the The Chronicles of Narnia. The first yarn creation to greet you was Jadis, the White Witch in her battle gown.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-27

    Next was the Pevensie boys in their armor.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-28

    The White Witch in her snow gown with wolf companions.

    ArtResurrected-CHA-Mega-Show-2015-Tracy-Alden-29

    Last but not least Mr. Tumnus, the faun and Lucy Pevensie at the lamp post.

    There was so much more that I didn’t photograph but in the next few months I will be receiving my orders and trying out new crafting goodness with all the new products!

    Until Next Time, Safe Travels!